 | | Go back to Resources
Register to search for MSDS |
Product |
| Product description and application
|
| Material type
|
| Azo-Grout™ 222 | | Non-toxic, solvent-free system for the structural repair of cracks in concrete structures, as well as sealing water leakage problems. Creates an elastic seal to allow movement of the existing crack, while eliminating additional crack formation. Reaction time may be increased with Azo-Cat™ 24.
| | Flexible solid; hydrophobic; two-component system with Azo-Nate™ 300 |
| | | | | |
Azo-Grout™ 224
| | Non-toxic, solvent-free system for the structural repair of cracks in concrete structures, as well as sealing water leakage problems. Used when a strong structural repair is needed. Reaction time may be increased with Azo-Cat™ 24. | | Dense solid; hydrophobic;
two-component system with Azo-Nate™ 300
|
| | | | | |
Azo-Grout™ 226
| | Non-toxic, solvent free system for use in anchoring bolts in mines. Can also be used as a waterstop or a soil stabilizer. | | Hard solid; hydrophobic; two-component system with Azo-Nate™ 300
|
| | | | | |
| Azo-Grout™ 424 | | Solvent-free product for water cut-off applications, including most stress load and corrosive environments. Serves as an elastic gasket in moving concrete cracks and joints. UL approved for potable water applications. Reaction time may be increased with Azo-Cat™ 25. | | Flexible foam; hydrophobic |
| | | | | |
Azo-Grout™ 425
| | Cartridge product for use in dry applications in leaking cracks and joints in residential and commercial basements, garages and parking structures. Suitable for repairs in confined spaces where pump injection is not practical. | | Flexible foam; hydrophobic; two-component system |
| | | | | |
| Azo-Grout™ 443 | | Low viscosity product used in all soil types to prevent erosion by forming a rock-like mass that provides structure and stabilization. Reaction time may be increased with Azo-Cat™ 25. | | Rigid foam; hydrophobic
|
| | | | | |
Azo-Grout™ 447
| | Low viscosity, solvent-free product for the effective stabilization of water-bearing soils and to serve as a locking agent for rock anchors. Also used to seal cracks and joints in concrete, buildings, tunnels and utility vaults. Reaction time may be increased with Azo-Cat™ 48. | | Rigid foam; hydrophobic
|
| | | | | |
| Azo-Grout™ 458 | | Uses water to provide a watertight seal to repair underground concrete in mines, tunnels and subways. Reaction time may be increased with Azo-Cat™ 26. | | Semi-rigid foam; hydrophobic |
| | | | | |
Azo-Grout™ 551
| | Solvent-free, low viscosity system used as an effective stabilizer in water-bearing soils. Can also lift sunken floors, slabs and roadways. | | Rigid foam; hydrophobic;
two-component system with Azo-Nate™ 300
|
| | | | | |
Azo-Grout™ 675
| | Solvent-free product used for sealing cracks and joints where there is heavy water inflow, such as manholes, sewer pipes, concrete dams and tunnels. UL approved for potable water applications. | | Flexible gel to rubber-like foam; hydrophilic
|
| | | | | |
Azo-Grout™ 695
| | Permanent waterstop product that works with a broad range of water ratios to provide an effective means of stopping water seepage. | | Strong, flexible foam to elastomeric gel; hydrophilic
|
| | | | | |
| Azo-Nate™ 300 | | Part of most Azo-Grout™ two-component systems.
| | |
| | | | | |
Azo-Cat™ series
| | Catalysts used to speed up reaction times of the grout products.
| | |
